Nº533H

NO533H

Amplifier With Outstanding Performance

The Nº533H shares the same basic amplifier module as the Nº531H and Nº532H but, with three channels, lends itself to multi-channel environments where one might need more power at times than others.

Find a Dealer

Nº533H

The Nº533H shares the same basic amplifier module as the Nº531H and Nº532H but is a semi-monoblock design. With power supplies that can be shared across multiple channels, this design lends itself well to multi-channel environments where one channel might need more power at times than others. All other features of the Nº533H are identical to the Nº531H and Nº532H and the common design creates a consistent sonic signature for use in multiple amplifier system configurations.

The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.

Highlights & Specs
Documents & Downloads

Nº533H Highlights

Reliable, high-power in four different channel configurations provide ideal solutions for any system
Ethernet and 12V trigger control capability for system integration
Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels
Fully-differential circuitry with both balanced XLR and single-ended RCA inputs

General Specifications

Frequency Response	Within 0.5dB from 10Hz to 20kHz
Input Impedance	60 kΩ (balanced); 30 kΩ (unbalanced)
Input Sensitivity	2.83Vrms output at 130mVrms input
Height (with feet)	7.65" (19.4cm); (without feet) 6.97" (17.7cm)
Width	17.75" (45.1cm)
Depth	19.83" (50.4cm)
Weight	Net Weight 90.0 lbs (40.8kg) Shipping weight 100.0 lbs (45.4kg)
Communication and Control	one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector
Inputs	Two balanced XLR inputs; two unbalanced RCA inputs
Rated Output Power Into 8 Ohms	300W/ch (20Hz to 20kHz at
Signal-to-Noise Ratio	>85dB, reference level 2.83 Vrms
Gain	26.8dB
Power Requirements	100V~, 120V~, 230V~, factory set for destination country
Speaker Connections	One pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models)

Audio Specifications

Frequency Response	Within 0.5dB from 10Hz to 20kHz
Input Impedance	60 kΩ (balanced); 30 kΩ (unbalanced)
Input Sensitivity	2.83Vrms output at 130mVrms input
Height (with feet)	7.65" (19.4cm); (without feet) 6.97" (17.7cm)
Width	17.75" (45.1cm)
Depth	19.83" (50.4cm)
Weight	Net Weight 90.0 lbs (40.8kg) Shipping weight 100.0 lbs (45.4kg)
Communication and Control	one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector
Inputs	Two balanced XLR inputs; two unbalanced RCA inputs
Rated Output Power Into 8 Ohms	300W/ch (20Hz to 20kHz at
Signal-to-Noise Ratio	>85dB, reference level 2.83 Vrms
Gain	26.8dB
Power Requirements	100V~, 120V~, 230V~, factory set for destination country
Speaker Connections	One pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models)