Nº532H

Nº532H

NO532H-EU

Mono-Block Amplifier With Independent Power Supplies


The Nº532H has independent power supplies for each of two 300W channels into 8 ohms for unsurpassed dynamics and transient responses with today’s demanding audio formats, and stability with even the most difficult to drive loudspeakers.

Find a Dealer

Nº532H

The Nº531H and Nº532H are both true mono-block designs with independent power supplies for each channel and are rated at 300W per channel into 8 ohms. The transformers and power supply designs deliver unsurpassed dynamics and transient responses for today’s demanding audio formats and provide stability with even the most difficult to drive loudspeakers. Fully differential circuitry ensures that balanced input signals stay that way throughout the signal path and traditional Mark Levinson “Hurricane” binding posts offer secure termination to the loudspeaker.

The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.

  • Highlights & Specs
  • Documents & Downloads

Nº532H Highlights

  • Reliable, high-power in four different channel configurations provide ideal solutions for any system
  • Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels
  • Fully-differential circuitry with both balanced XLR and single-ended RCA inputs
  • Ethernet and 12V trigger control capability for system integration

General Specifications

Frequency Response: Within 0.5dB from 10Hz to 20kHz
Input Impedance: 60 kΩ (balanced); 30 kΩ (unbalanced)
Input Sensitivity: 2.83Vrms output at 130mVrms input
Height: (with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm)
Width: 17.75" (45.1cm)
Depth: 19.83" (50.4cm)
Weight: Net Weight: 74.0 lbs (33.6kg); Shipping weight: 84.0 lbs (38.1kg)
Inputs: One balanced XLR input per channel; one unbalanced RCA input per channel
Rated Output Power Into 8 Ohms: 300W/ch (20Hz to 20kHz
Signal-to-Noise Ratio: >85dB, reference level: 2.83 Vrms
Gain: 26.8dB
Power Requirements: 100V~, 120V~, 230V~, factory set for destination country;
Speaker Connections: One pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models)

Audio Specifications

Frequency Response Within 0.5dB from 10Hz to 20kHz
Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced)
Input Sensitivity 2.83Vrms output at 130mVrms input
Height (with feet)
Width 17.75" (45.1cm)
Depth 19.83" (50.4cm)
Weight Net Weight
Inputs One balanced XLR input per channel; one unbalanced RCA input per channel
Rated Output Power Into 8 Ohms 300W/ch (20Hz to 20kHz
Signal-to-Noise Ratio >85dB, reference level
Gain 26.8dB
Power Requirements 100V~, 120V~, 230V~, factory set for destination country;
Speaker Connections One pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models)

View all Amplifiers

View all Amplifiers

Not finding what you're looking for?

View all Amplifiers