Nº536

The Mark Levinson® № 536 monaural amplifier features Pure Path circuit design for a high-current, low-feedback amplifier that delivers 400 watts per channel and operates in pure class A for most listening conditions, doubles down into 4 ohms, and remains stable into 2-ohm loads.


Nº536

The Mark Levinson® № 536 monaural amplifier features Pure Path circuit design for a high-current, low-feedback amplifier that delivers 400 watts per channel and operates in pure class A for most listening conditions, doubles down into 4 ohms, and remains stable into 2-ohm loads.


Input Connectors

one XLR Balanced, one RCA Unbalanced

Frequency Response

10Hz to 20kHz ±0.05dB

Voltage Gain

25.5dB

Input Impedance

60 kΩ balanced; 30 kΩ unbalanced

Input Sensitivity

2.83Vrms output at 150mV input

Height (without feet)

6.97” (17.7cm)

Height (with feet)

7.65” (19.4cm)

Width

17.75” (45.1cm)

Depth

19.83” (50.4cm)

Net weight

100lbs (45.4kg)

Shipping weight

117lbs (53kg)

Signal-to-Noise Ratio

>85dB, reference level: 2.83 Vrms

Total Harmonic Distortion (THD)

>0.25%

Power Requirements

100V~, 120V~, 230V~, factory set for destination country, 1500W

Control Connectors

Ethernet, RS-232, Trigger In, Trigger Out, USB-A, Mini USB

Speaker Connectors

two pairs of Hurricane loudspeaker outputs, banana-plug sockets per channel, except on 230 VAC version

Rated Output Power

400W RMS @ 8Ω, 20Hz to 20kHz at

Highlights

  • Pure Path discrete, direct coupled, fully balanced, monaural signal path
  • Fully differential class-AB architecture, operates in class A for most listening conditions
  • 6000-series aluminum chassis, extremely high precision, exceedingly low tolerances
  • Expansive, fine imaging, extended low frequency response/pitch, and natural high frequencies
  • Rated for 400wpc into 8 ohms, 800wpc into 4 ohms, with 2-ohm stability
  • System-integration connectivity: Ethernet, IP, RS-232, triggers, web monitoring and control
  • Painstakingly optimized, little negative feedback, bandwidth, slewing, and open-loop linearity
  • Custom-designed, low noise toroid with separate secondary windings for each output stage
  • Designed and handcrafted in the USA