Specifications subject to change without notice. Not responsible for typographical errors
|
| Analog Filter: |
Bessel-tuned, linear phase to 40kHz |
| Channel Separation: |
Better than 110dB |
| Conversion Rate: |
352.8kHz or 384kHz (input signal dependent), 24-bit |
| Digital to Analog Conversion: |
Dual differential 24-bit DACs |
| Dynamic Range: |
96dB (10Hz-30kHz) |
| Frequency Response: |
10Hz - 20kHz, +0dB, -0.3dB |
| Input Complement: |
1 EIAJ digital input
1 S/PDIF (RCA) digital input
2 RJ-45 modular Communication Links
1 3.5mm external IR input jack
1 IEC AC mains connector |
| Intermodulation Distortion: |
Less than 0.005% (SMPTE IMD) |
| Low-level Linearity: |
Deviation less than 2dB to below -90dBFS, less than 2dB to below -102dBFS w/20-bit input |
| Mains Frequency: |
50 or 60 Hz, factory set for destination country |
| Mains Voltage: |
100V, 120V, 200V, 220V, 240V, factory set for destination country |
| Maximum Output (0dBFS): |
4.45V balanced
2.225V single-ended |
| Other I/O: |
2 RJ-45 modular Communication Links
1 3.5mm external IR input jack
1 IEC AC mains connector |
| Output Complement: |
2 male XLR balanced audio outputs
2 RCA single-ended audio outputs
1 AES/EBU (XLR) digital output
1 S/PDIF (RCA) digital output |
| Output Impedence: |
10ohms |
| Power Consumption: |
36 watts maximum |
| Shipping Weight: |
50lbs. (23kg) |
| Signal to Noise Ratio: |
105dB (10Hz-30kHz) |
| Total Harmonic Distortion: |
0.002% @ 1 kHz, 0dBFS (10Hz-30kHz) |
| Volume Control Range: |
-61.2 to +12dB |
