Specifications subject to change without notice. Not responsible for typographical errors
|
| Controller Connectors: |
1 IEC AC mains recepticle
1 earth ground terminal
2 controller/DC cable connectors
1 3.5mm "mini" jack for IR input
1 3.5mm "mini" jack for trigger out
1 3.5mm "mini" jack for trigger in
3 Mark Levinson Link communications connectors
1 6-pin RJ-11 RS-232 port
2 8-pin RJ-45 control ports (PHASTLink compatible) |
| Crosstalk: |
Input unterminated: less than -120dB
Input terminated: less than -140dB
(any input to any output) |
| Dimensions: |
Preamplifier: 4.17"h × 19.5"w × 11.385"d
Controller: 3.03"h × 19.5"w × 12.96"d |
| Frequency Response: |
10Hz - 40kHz ±0.1dB |
| Gain: |
0, 6, 12, or 18 dB in the line stage
either 40 or 60 dB in the optional phono module |
| Gain Resolution: |
0.1dB steps above 23.0 in display (-57dB)
1.0dB steps below 23.0 in display (-57dB) |
| Input Impedence: |
100 kohms |
| Input Overload: |
When gain is set to +18 dB: 2V on XLR, 1V on RCA
When gain is set to +12 dB: 4V on XLR, 2V on RCA
When gain is set to +6 dB: 8V on XLR, 4V on RCA
When gain is set to +0 dB: 16V on XLR, 8V on RCA |
| Mains Voltage: |
100V, 120V, 220V, 230V or 240VAC at either 50 or 60Hz (set at the factory) |
| Maximum Output: |
16V on XLR
8V on RCA |
| Output Impedence: |
less than 10ohms on XLR
less than 20ohms on RCA |
| Power Consumption: |
150W maximum |
| Preamplifier Inputs: |
3 pr. balanced on XLR
5 pr. single-ended on Madrigal RCA
(optional)
2 pr. phono on either XLR or Madrigal RCA
2 Controller/DC cable connectors
1 ground terminal |
| Preamplifier Outputs: |
2 pr. balanced main output on XLR
2 pr. single-ended main output on RCA
1 pr. record output on XLR
2 pr. record outputs on Madrigal RCA
1 3.5mm mini jack for trigger out |
| Residual Noise: |
20Hz to 20kHz, input terminated: less than -120dB |
| THD + Noise: |
Less than 0.001% |
| Volume Control Range: |
80.0dB |
| Weight: |
Controller: 60lbs. (27kg)
Preamplifier: 46lbs. (21kg) |
