Nº535H
Amplifiers
(Print this page)OVERVIEW
As the first five-channel amplifier from Mark Levinson, the No535H sets the bar high. Using a semimono-block design like the No 533H, the No535H can deliver 200W per channel into all five channels simultaneously. Twelve output transistors and large amounts of capacitance per channel ensure that this amplifier is more than capable of delivering realistic dynamics and transients with audiophile-grade detail and response for even the most demanding audio tracks.
The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.
Main Features
- Reliable, high-power in four different channel configurations provide ideal solutions for any system
- Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels
- Fully-differential circuitry with both balanced XLR and single-ended RCA inputs
- Ethernet and 12V trigger control capability for system integration
SPECIFICATIONS
| Inputs | five balanced XLR inputs; five unbalanced RCA inputs |
| Speaker Connections | five pairs loudspeaker outputs with banana-plug sockets (banana-plug socket not available on the 230 VAC models) |
| Communication and Control | one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector |
| Rated Output Power into 8 ohms | 200W/ch (20Hz to 20kHz at <0.5% THDz0 |
| Frequency Response | within 0.5dB from 10Hz to 20kHz |
| Signal-to-Noise Ratio | >85dB, reference level: 2.83 Vrms |
| Input Sensitivity | 2.83Vrms output at 130mVrms input |
| Gain | 26.8dB |
| Input Impedance | 60 kΩ (balanced); 30 kΩ (unbalanced) |
| Power Requirements | 100V~, 120V~, 230V~, factory set for destination country |
| Power Consumption | 1000W |
| Height | (with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm) |
| Width | 17.75" (45.1cm) |
| Depth | 19.83" (50.4cm) |
| Weight | Net weight: 98.5 lbs (44.7kg); Shipping weight: 108.5 lbs (49.2kg) |
REVIEWS
DOWNLOADS
No500H Series Owner's Manual
No500H Series RS232 Control Guide
No500H Series FAQ
Mark Levinson No500H Series Brochure
RELATED PRODUCTS
Disclaimer: Online retail purchases are not authorized. All products must be purchased through an authorized dealer or distributor. Please use the locator tool above. 