Mark Levinson

Nº533H

Amplifiers

(Print this page)

OVERVIEW

The No 533H shares the same basic amplifier module as the No 531H and No532H but is a semi-monoblock design. With power supplies that can be shared across multiple channels, this design lends itself well to multi-channel environments where one channel might need more power at times than others. All other features of the No 533H are identical to the No 531H and No532H and the common design creates a consistent sonic signature for use in multiple amplifier system configurations.

The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.

Main Features

  • Reliable, high-power in four different channel configurations provide ideal solutions for any system
  • Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels
  • Fully-differential circuitry with both balanced XLR and single-ended RCA inputs
  • Ethernet and 12V trigger control capability for system integration

SPECIFICATIONS

Inputs one balanced XLR input per channel; one unbalanced RCA input per channel
Speaker Connections one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models)
Communication and Control one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector
Rated Output Power into 8 ohms 300W/ch (20Hz to 20kHz at <0.5% THD)
Frequency Response within 0.5dB from 10Hz to 20kHz
Signal-to-Noise Ratio >85dB, reference level: 2.83 Vrms
Input Sensitivity 2.83Vrms output at 130mVrms input
Gain 26.8dB
Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced)
Power Requirements 100V~, 120V~, 230V~, factory set for destination country;
Power Consumption 900W
Height (with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm)
Width 17.75" (45.1cm)
Depth 19.83" (50.4cm)
Weight Net Weight: 90.0 lbs (40.8kg) Shipping weight: 100.0 lbs (45.4kg)

REVIEWS

2012 Review by Chris Heinonen HomeTheaterHiFi.com

2011 ADEX Award for the No500H Series Amplifiers, Design Journal 

2010 Review by Andrew Robinson HomeTheaterReview.com

DOWNLOADS

No500H Series Owner's Manual
No500H Series RS232 Control Guide
No500H Series FAQ
Mark Levinson No500H Series Brochure
No500H Series Chinese Owner's Manual

RELATED PRODUCTS

Nº531H
Nº532H
Nº535H


MAILING LIST

Enter your email address to receive our updates. You can opt out at any time.

FIND A DEALER

Enter your zip code to find US dealers who carry our products.

FIND A DISTRIBUTOR

Use the drop down menu to find international distributors.

-- Select --

HARMAN Luxury Audio Group

JBL Synthesis Mark Levinson Revel Lexicon

Disclaimer: Online retail purchases are not authorized. All products must be purchased through an authorized dealer or distributor. Please use the locator tool above.

©2014 Harman International Industries, Inc.